Repairs to uPVC Windows

uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they are not susceptible to corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, making it very hazardous and possibly fatal. It is essential to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace and will usually fit into the frames that were previously in use very easily. However when you have double-pane windows that are held in place by internal beading it will be more difficult to take out the existing panes and install new ones. In this instance, it is necessary to purchase plastic spacers to help the new pane fit into the Window doctor frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass yourself. You should also lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric and not onto the floor which could cause them to be trampled under.

It's a good idea to tape the gap once the glass is removed. This will keep drafts and water from entering your home until a professional is able to repair the window. This will also act as a barrier that will prevent any intruders from getting access into your home. If the gap is large, you might think about the security door with an integrated window, as it offers the best of both worlds.

2. Sagging

upvc repairs near Me windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. As time passes, they may develop a variety of issues that include sagging. A sagging uPVC window could cause issues with light, draughts and upvc repairs near me even security. If you find that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from becoming worse.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll have to open the window to get to the frame. With a screwdriver, you can unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've repositioned your hinges. If you are happy with the fit of the window, you can tighten screws to hold them in the right position.

If you aren't able to move the hinges you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause their tightness to decrease. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows are watertight and draught-proof.

UPVC handles can also become loose. Most often it is due to screws that have come loose over time. However, it could occur because the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC hand. You'll first need to close the window and perform an initial fitting. The corner joints of the sash need to be aligned with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle, and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it's crucial to take action. Water leaks from windows can not only cause degrading of the structure of your home but also undermine your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on how serious the issue is, the old caulking may need to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

Make sure that the drainage holes are free of debris in them and ensure that the sill pan has been angled correctly to drain away from the window. In more serious instances, you might need to consider replacing the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and can quickly spread across the home.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is more with the seal rather than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open, or if it opens in a breeze. They can be repaired by any skilled DIYer and are usually done within a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that are hinged and like any mechanical part they are susceptible to wear and tear over time. Changing a window hinge is essentially a simple process, but it's simpler if you have someone to help you hold the frame in place.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. You can do this by looking for the arrows on each hinge. This shows which way the window should open.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain manner or because of poor installation at the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be pleased to offer you suggestions.

It is also important to lubricate the hinges on a regular basis. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. Ideally, you should do this at least once a year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. The hinges may also become misaligned due to wear, causing an opening where the sash and frame meet. If they're beyond repair, it might be required to realign them. The interlock, which is on the hinge side of the window, can also be misaligned, and again it's feasible to give them a good clean, but in some instances it could be necessary to get them replaced.

The next common reason for draughts is window seals, these are susceptible to being worn out or damaged over time, and will allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and will lessen the possibility of draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler which can be hung over your window sill. These will keep your home warm by blocking cold air.

With a little regular maintenance and repairs windows made of upvc will provide an excellent level of insulation and security for your home. It is important to remember that all windows will eventually wear out and it could be cheaper to replace them than to repair them. If you are experiencing issues with your window made of upvc it is recommended to speak with a professional as soon as possible.