Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not decay or rust as timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce Repair My Windows And Doors costs as well as improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and even be fatal. You should take the time to make sure that your windows are in good shape.

For single pane windows, it is relatively easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. If you have double glazing-paned windows which are joined by internal beading, it will be harder to remove and replace the old panes. In this case, you will need to find some plastic spacers that help the new pane to fit correctly into the window frame.

If you're planning to try to remove the glass panes yourself it is crucial to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled.

Once the glass is removed from the window, it's best to cover the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the home until a professional can come out and fix the window. This also serves as an obstacle to stop criminals from getting into your home. If the distance between the door and Repair My Windows And Doors the window is significant, you may prefer security screens that has windows. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. However, with time, they can suffer from a variety of issues, including sliding. A window that is sagging can cause problems with light, draughts or Repair My Windows And Doors even security. If you notice that your uPVC window doctor is beginning to sag it is important to act swiftly to stop the issue from getting worse.

Repositioning the hinges could aid in fixing a window that is sagging. You'll first need to open the windows to reach the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you are happy with the fit of the window, you can tighten screws to secure them in place.

If you cannot reposition the hinges, you could have to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to lose their tightness. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are watertight and draught-proof.

UPVC handles can also loosen up. Often, this is caused by screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's relatively simple to fix a loose uPVC handle. The first step is to close the window and perform a test fit. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't, you can use a screwdriver to loosen the handle, and then return the mechanism to its original the position it was in.

3. Water Leaks

It is important to take action if you wake up every morning to find mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home, and impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be completed by any competent DIYer. Based on the severity of the issue the old caulking might need to be removed before a new layer is applied. When it is time to uPVC repair, it is important to avoid over-caulking. This will make your window harder to clean and decrease its energy efficiency.

It is important to check that the drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious situations, you might have to consider replacing the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. The fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass it is more likely the issue is with the seal rather than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open with a breeze, it may be hinges that are at fault. These are easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that are hinged and, just like any mechanical component they will wear out over time. The process of replacing a hinge on a window is an easy process, but it's easier when you have a person to help you hold the frame up.

Verify that the uPVC hinges are closed and open in the right direction. You can check this by checking for the arrows on each hinge, this indicates which way the window should open.

The problem can be caused either by opening the window improperly or a faulty installation at the factory. Sending us a photo through our website can often solve the issue. We are happy to give advice.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window open and close more easily. It can also lower the possibility of a window sticking and help prevent corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different causes. The hinges can also be unbalanced due to wear, causing a gap where the sash meets frame. If they're beyond repair, it might be required to realign them. The interlock may be unbalanced. This happens on the hinge's side and may need to be cleaned. In some instances, it may be necessary to replace the hinges.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. Installing high-quality weatherstripping will help to prevent draughts. Another option is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and will reduce the possibility of draughts.

Another, and most effective ways to cut down on drafts is to use a draught excluder. These are typically fabric tubes which are filled with a sort of filler and can be placed on the top of your windowsill. They will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs your windows made of upvc will provide an excellent level of insulation and security for your home. However, it is important to realize that all windows have a lifespan and there may come the point when it's more efficient to replace them than repair them. If you encounter any issues with your Upvc window you should consult an expert as soon as you can.