Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions against theft with the Ghost Immobiliser. It is discreet and does not require any additional key fobs.

The device makes use of the buttons on your vehicle (steering wheel doors, door panels and centre console) to create a unique pin code sequence of up to 20 presses. This allows your vehicle to start.

Simple PIN code Change Process

Many owners are upgrading their security due to the increase in vehicle theft. There are a myriad of security products that are available from tracking systems to alarms and immobilisers. However, not all of these are equally effective in protecting your car. A tracking system may aid in finding your vehicle if it's stolen, but it will not stop the crime. Immobilisers, on the other hand is exactly what says on the tin: it shuts down the engine of your car to prevent it from being started. The Autowatch Ghost is one of the most advanced options available, making it almost impossible for thieves steal your car.

By using the buttons that are already present in your car The ghost device is able to create a unique sequence which must be entered before the car's engine will start. This can be accomplished using the indicator stalk, window or heater buttons. Additionally it is possible to use an app for mobile devices that can act as an emergency PIN code override and allows the driver to operate the car without using the button sequence. This is a great solution when you wish to donate your car to valet parking or for servicing. The immobiliser will stay active.

The Ghost is an unique and innovative device that works by using the buttons of your vehicle instead of as a standalone device. It is not only an effective deterrent to theft of your vehicle and vandalism, but it can be used to secure any future vehicles you own. This makes it a much better investment than a conventional wheel lock.

Weatherproof, tiny device

The Autowatch ghost immobiliser is an advanced security device that protects your pride and joy against key cloning, hacking and ECU swapping. It's a small weatherproof device that communicates with the ECU of your vehicle directly over the CAN bus, causing it to shut down the motor. It can be installed in the vehicle without the need for extra wiring and has been extensively tested to make sure it is compatible with all vehicles. It also is resistant to jamming devices, which are a common technique used by thieves to bypass immobilisers.

The advantage of CAN data over conventional systems is that they operate in a silent manner. It can't be detected by sophisticated RF scanning or code-grabbing technologies and is also unrecognizable by traditional diagnostic tools. The Autowatch Ghost does not use LED indicators and instead uses buttons in your vehicle, such as the steering wheel, the centre console, or door panels, to create a unique disarming sequence. You can even make this sequence as long as 20 presses to provide additional security. The iPhone app allows only one connection, with the Ghost's unique pairing code. the Ghost. All communication between the two devices is protected.

The Ghost will stop car thieves from putting in an ignition key replacement or replacing the ECU in order to bypass the immobiliser. It will only allow the engine to run when the correct PIN code is entered. It is able to be operated temporarily in Valet/Service mode (with parameters set, such as a 30mph speed limit), so you can hand your car to valet or service without entering an entry code.

Every vehicle is tested

The Autowatch Ghost is a world-first aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device intercepts electronic signals that block the system of your vehicle from going through its normal startup routine until you input an individual passcode. The system can be activated and deactivated through your smartphone's app without the need for wires.

Standard factory immobilisers in automobiles function through a transponder built into the key that sends an indication to the ECU. The car will start when the correct code is sent. However, if a transponder of a different vehicle is used instead, the immobiliser will not recognise it. This makes it possible for the vehicle to be stolen and started. A South African company that is at the forefront of vehicle safety systems technology has developed the Ghost immobiliser. It guards you against key cloning or hacking, and even key theft. The only way thieves could take your car is physically towing it away and even then, they would not be allowed to drive it.

ghost immobiliser problems (list-munkholm.hubstack.net) makes use of buttons in your vehicle, like the indicator stalk, steering wheel, as well as the door panels, to generate an individual PIN code which must be entered in order to use your car. This is done without any additional hardware, like keys fobs. It can take up 20 to 20 presses. It is also inaccessible to diagnostic equipment and does not transmit radio frequency signals, which means thieves are not able to make use of sophisticated RF scanning or code-grabbing technology to determine if the security system has been installed.

Contrary to physical anti-theft devices such as clamps or wheel locks, Ghost is covertly integrated into the vehicle so it can't be removed or disabled by thieves. It is even more difficult to get rid of than a car alarm, which requires disarming via an action sequence. This makes it an excellent supplement to a GPS tracker that can assist in locating your car after it's been taken.

Override of emergency PIN code

You don't have to go far on social media sites to find stories or even videos of vehicles that were stolen by car thieves employing the latest technology tools available to them. Key-cloning devices, for instance, and hacking tools that allow them to start the vehicle without your original keys.

The Ghost immobiliser has been designed to stop this and provide you with an extra layer of security in order to prevent your vehicle from being targeted by thieves. It is created by creating an individual pin code push sequence using your buttons on the steering wheel, door panel and centre console. The unique pin code must be entered along with your original key fob to prevent the vehicle from getting started. The unique override PIN can be found on the black card you will receive following your installation and is easy to remember as there are no LED indicators.

The device is hidden in the vehicle's wiring and doesn't emit any radio signals, therefore it can't be recognized by thieves with diagnostic software that can detect the type of security system you have installed. This makes it a great alternative to an electronic device for tracking.

Unlike other security systems, which use a relay in engine bays, these immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to disable the vehicle completely by sending a digital block of commands that is sent to both the ECU and the engine.

These systems can also be connected to an analog alarm immobiliser or tracker. This should be specified prior to installation. They are also compatible with service/valet modes and a great alternative to a tracking device when you bring your vehicle to the dealer for repairs to an electrical issue.

Service/Valet mode

In recent years there has seen an increase in the number of cars being stolen from owners without keys. It is more easy than ever to take your joy and pride thanks to the availability of key cloning tools and door lock picks. To combat this we have launched the Autowatch Ghost immobiliser that prevents your car from being driven even if your keys have been copied or your car has been hijacked.

It directly communicates with your car's ECU (Engine Control Unit) through the data loop of CAN. It is completely silent, because it does not utilize radio frequencies or key fobs. It isn't detected by diagnostics or any other hacking device. It also stops the user from using a new ECU or key to bypass the system, as only the PIN code allows the engine to be started.

The device is hidden inside your car by using buttons on the steering wheel, centre console & door panels. A unique and reversible PIN code sequence up to 20 digits must be entered prior to being able to start your car.

This is the very first aftermarket CAN-bus immobiliser that is being created. It will prevent your vehicle from being started or driven when you don't enter a PIN number first. If the device is activated and you attempt to drive away, it will display an indicator on your dash, which will flash regularly for around 300m. If you type in your PIN code during this time, it will deactivate the anti-hijack and your car will continue to operate in the normal way. If you do not enter your PIN in this moment, the indicator will continue to flash and ghost immobiliser problems will require a new PIN code each time you attempt to start your car.